Digital Yacht GS50 PILOT HS40 LINEAR DRIVE 12V

The HS40PLUS hydraulic steering systems are designed specifically for marine autopilot steering applications. They combine a hydraulic cylinder with clutch, reversing pump and reservoir in a compact installation but with the pump remote from the cyclinder to allow installation in tight spaces The solenoid clutch disengages the hydraulic circuit allowing manual mechanical steering to be used in conjunction with the autopilot. The GS50 clutch connection automatically controls this. Description A pre-filled hydraulic system comprising a cylinder with clutch, pump and reservoir.

 

The cylinder is free to float until the solenoid clutch is engaged, the reversing pump is then used to extend and retract it. Integral relief valves protect the installation from damage. Application Designed specifically for use on sailboats and power-craftwith displacement and fast planing hulls. The pumps and cylinders can be matched to give the hard-over times and thrusts to suit the application. Further combinations using our 5 reversing pump sizes are also possible. Features Shorter than conventional cylinder 10" stroke Integral solenoid bypass valve and relief valves. Fully serviceable. Quiet operation. A number of pump sizes with 12 or 24v options.

 

Marine environment protected (under-deck). Low power consumption. Fitting kit included. Low back-drive. Quick release mounting. Cylinder Volume 293cc (Nominal) Stroke 254mm Adjustment ± 5mm Performance Maximum thrust (intermittent) 675 kg Hard over time HS40plus 10 13 sec nominalTemperature rating minimum -20ºc Temperature rating maximum +65ºc Relief valve setting 62 bar Back-drive at 12 sec Hard-over 7kg Electrical Motor voltage nominal 12 or 24v DC Motor power 100 watt Max current 12v 25% duty 22.5 A Max current 24v 25% duty 11.2 A Rotation Reversing Protection IP44 Connection 1m Flying Lead 2 Core 2.5mm² Ignition protection BS EN 28846:1993 Clutch Coil power continuous 12 watt Connection DIN 43650 Orientation Red lead Positive Cylinder Retracts Oil Recommended Q8 Dynobear 10 Equivalent Mineral based hydraulic Min. ISO VG10 Max. ISO VG40 Materials Body Aluminium BS 1490 Cylinder rod Chrome Plated Stainless Steel Seals Nitrile & PTFE Body Protection SP270 System Weight 11 kg Gross